How to: Remote reboot MTS-5800

Document created by viavisupport on Oct 3, 2017
Version 1Show Document
  • View in full screen mode
How to: Remote reboot MTS-5800                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Overview

How to: Remote reboot MTS-5800

Solution Steps

Release 3.2 supports now the telnet commands to reboot the unit. To reboot the MTS-5800 follow this step-by-step procedure:
  • Open the DOS box
  • Type: telnet <ipaddress> 8000
  • *rem
  • SYST:REBoot
You will see the IP address (for example: telnet 192.168.0.60 8000) in the DOS Box
The entry of *rem and SYST:REBoot is hidden and not displayed. In PUTTY open a RAW connection to port 8000, like in the Remote Control Command guide. Using Putty you'll see the entered commands on the screen Alfredo Fierro
EMEA TAC

Attachments

    Outcomes