How to: MTS- 4000 Firmware recovery procedure

Document created by viavisupport on Oct 3, 2017
Version 1Show Document
  • View in full screen mode
How to: MTS- 4000 Firmware recovery procedure                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Overview

How to: MTS- 4000 Firmware recovery procedure

Solution Steps

MTS4000 recovery mode Step-by-step procedure:
  • Install the latest MTS-4000 FW from your PC on a USB pen drive formatted in FAT32: http://4k.updatemyunit.net
  • Power off the MTS-4000
  • Plug the charger on the unit an be sure that you are at least 80% charged befor starting the upgrade
  • Connect the Pen Drive to the USB port on the MTS-4000
  • Press at the same time ?shift? + ?Setup? keys and while holding this keys pressed, press ON
  • This will start the recovery SW mode on the unit
Alfredo Fierro
EMEA TAC

Attachments

    Outcomes