viavisupport

How to: MTS- 4000 Firmware recovery procedure

Discussion created by viavisupport on Aug 16, 2019
Overview
How to: MTS- 4000 Firmware recovery procedure
Solution Steps
MTS4000 recovery mode Step-by-step procedure:
  • Install the latest MTS-4000 FW from your PC on a USB pen drive formatted in FAT32: http://4k.updatemyunit.net
  • Power off the MTS-4000
  • Plug the charger on the unit an be sure that you are at least 80% charged befor starting the upgrade
  • Connect the Pen Drive to the USB port on the MTS-4000 
  • Press at the same time “shift” + “Setup” keys and while holding this keys pressed, press ON 
  • This will start the recovery SW mode on the unit 
Alfredo Fierro
EMEA TAC

Outcomes